A106 B seamless steel pipe is a material in the American standard ASTM A106M. ASTM A106 GR B steel pipe is basically similar to the domestic 20G material. The purpose of this material is to be used for water-cooled wall pipes in water-cooled walls, economizers, and reheater steam pipes.
SA106 B Seamless Pipe specification range: outer diameter ranges from 21.3mm to 762mm, and wall thickness ranges from 2.0 to 140mm. Single length range is 3-13 meters.
In order to improve the corrosion resistance of ASME SA106 Gr.B steel carbon pipe, GNEE usually performs surface treatment. Common surface treatment methods include coating, galvanizing, spraying, etc.
The coating can form a dense protective film on the surface of the steel pipe to prevent the penetration of corrosive media.
SA106 GR B Carbon Steel Tube
GNEE ASTM A106 GR B Carbon Steel Pipe Specifications
Implementation standards: ASMESA-106/SA-106M ASTM A106/A106M
Chemical composition of A106 B seamless steel pipe:
Carbon ≤0.30, manganese: 0.29~1.06, phosphorus: ≤0.035, sulfur: ≤0.035, silicon: ≥0.10, chromium: ≤0.40, nickel: ≤0.40, copper: ≤0.40, molybdenum: ≤0.15, vanadium: ≤0.08
Tensile strength: ≥415MPa, yield strength: 240MPa,
Product specifications: outer diameter 21.3~762mm, wall thickness 3.0~140mm
Why Choosing GNEE ASTM A106 Grade B Seamless Carbon Steel Pipe
GNEE is a professional manufacturer of A106 GR B smls pipe, with an annual output of 100,000 tons. 80% of the output is exported, and each A106 B round carbon steel pipe is tested as follows before leaving the factory.
Hydrostatic test
Each pipe shall be subjected to a hydrostatic test without leakage through the pipe wall. The maximum rated hydrostatic test pressure for nominal pipes with an outer diameter of 88.9 mm or less may not exceed 2500 psi (17.2 MPa), and for all sizes of pipes with an outer diameter greater than 88.9 mm may not exceed 2800 psi (19.3 MPa)
Flattening test
Steel pipes with an outer diameter greater than 60.3 mm shall be subjected to a flattening test.
Bending test
Bending test shall be performed for pipes with an outer diameter less than or equal to 60.3 mm.
Nondestructive testing
Applicable to seamless carbon steel nominal pipes for high temperature service from NPS 1/8 to NPS 48, with nominal (average) wall thickness as given in ANSIB36.10.
If you are looking for seamless pipes, please contact us in time to get a quote! sales@gneetube.com
Factory environment of Medium carbon steel pipe
Gnee Customer visit
material pipe SA106M GR B Supplier
Hot Tags: astm a106 grade b seamless pipe, China astm a106 grade b seamless pipe manufacturers, suppliers, factory, EN10216 P195GH seamless pipe, S275JOH carbon steel pipe, SA210 Gr A1 Carbon Steel Pipe, ASTM A53 Class B pipe, EN 10219 S355JOH carbon seamless pipe, ASTM A179 round carbon steel tubing
