Stainless Steel Pipe Connection Method

There are various connection methods for stainless steel pipes. Common pipe fitting types include compression type, compression type, union type, push type, push thread type, socket welding type, union flange connection, welding type and welding and traditional connection. Combined derived series connection methods. These connection methods have different application scopes according to their different principles, but most of them are easy to install, strong and reliable. The sealing ring or gasket material used for the connection is mostly made of silicone rubber, nitrile rubber and EPDM rubber that meet national standards, which relieves users from worries.
Pressure connection steps:
1. Pipe breaking: Cut the pipe to the required length. When breaking the pipe, do not use excessive force to prevent the pipe from losing its roundness.
2. Remove burrs: After cutting the pipe, the burrs should be removed to avoid cutting the sealing ring.
3. Line marking: In order to completely insert the steel pipe into the pipe fitting socket, the insertion length must be marked and drawn on the pipe end.
4. Assembly: The sealing ring should be correctly installed in the U-shaped groove of the pipe fitting, insert the pipe into the socket of the pipe fitting, and wait for crimping.
5. Crimping: During crimping, the convex part of the pipe fitting is placed in the concave groove of the mold, and the jaws are kept perpendicular to the axis of the pipe.
6. Inspection: After the crimping is completed, use a special gauge to check the crimping size.