API 5L Grade X46 Pipe

Feb 27, 2024 Leave a message

What Is API 5L Grade X46?

API 5L Grade X46 is a carbon steel line pipe grade defined in the American Petroleum Institute specification API 5L, which covers seamless and welded line pipe for the transportation of oil, gas and water. The X in the grade designation refers to the specified minimum yield strength in thousands of psi, so X46 provides a minimum yield strength of 46,000 psi class, commonly stated as 46,400 psi (about 320 MPa). The grade is produced in PSL1 and PSL2 quality levels, and PSL2 pipe may be supplied in the X46N, X46Q or X46M delivery conditions, where N, Q and M denote normalised, quenched and tempered, and thermomechanically rolled processing respectively.

Chemical Composition

The chemical composition of X46 is controlled to deliver the required strength while maintaining weldability and toughness. PSL2 imposes tighter limits than PSL1, particularly on carbon, phosphorus and sulfur.

Element (Max) X46 PSL1 X46 PSL2
Carbon (C) 0.26% 0.22%
Manganese (Mn) 1.40% 1.40%
Phosphorus (P) 0.030% 0.025%
Sulfur (S) 0.030% 0.015%

Mechanical Properties

The tensile requirements for X46 pipe body are summarised below for both quality levels. The ratio between yield and tensile strength is specified for PSL2 to ensure a predictable margin between the two values.

Property - PSL1 Pipe Body Value
Yield strength Rt0,5, min 46,400 psi
Tensile strength Rm, min 63,100 psi
Seam tensile strength (welded), min 63,100 psi
Property - PSL2 Pipe Body Value
Yield strength Rt0,5, min 46,400 psi
Yield strength Rt0,5, max 76,100 psi
Tensile strength Rm, min 63,100 psi
Tensile strength Rm, max 95,000 psi
Yield to tensile ratio, max 0.93
Seam tensile strength (welded), min 63,100 psi

Elongation requirements are also specified for X46, measured on a 2-inch gauge length, and the applicable minimum value depends on the wall thickness of the pipe.

PSL1 vs PSL2

PSL stands for Product Specification Level. PSL1 is the base quality level, covering chemical composition and basic mechanical testing. PSL2 adds more demanding requirements: lower limits on carbon, phosphorus and sulfur, a maximum yield and tensile strength, a controlled yield-to-tensile ratio, Charpy V-notch impact testing, and non-destructive examination of the full pipe body. PSL2 is therefore preferred for sour service, offshore and other critical applications where higher reliability is required.

Manufacturing and Applications

X46 line pipe can be manufactured as seamless pipe (SMLS) or as welded pipe using ERW, LSAW or SSAW processes, depending on the diameter and wall thickness required. The grade is widely used in oil and gas gathering lines, transmission pipelines, water supply lines and general industrial piping where a moderate strength level with good weldability is required. For more demanding service conditions, higher grades such as X52, X60 or X65 may be selected.

Frequently Asked Questions

What does X46 mean in API 5L?

The X designation indicates line pipe with a specified minimum yield strength, and 46 refers to the minimum yield strength of 46,000 psi (about 320 MPa).

What is the yield strength of API 5L X46?

The minimum yield strength is 46,400 psi. For PSL2, the maximum yield strength is limited to 76,100 psi.

What is the difference between PSL1 and PSL2?

PSL2 requires tighter chemistry limits, a maximum strength, controlled yield-to-tensile ratio, impact testing and full-body non-destructive examination, making it suitable for more critical service.

Can X46 pipe be seamless?

Yes. X46 is available as both seamless (SMLS) and welded (ERW, LSAW, SSAW) pipe depending on the required size and application.

What is the tensile strength of X46 pipe?

The minimum tensile strength is 63,100 psi (about 435 MPa), and for PSL2 the maximum tensile strength is 95,000 psi.