What Are EN 10216-2 and ASTM A106?
EN 10216-2 is a European standard covering seamless steel tubes for pressure purposes, specifically non-alloy and alloy steels with specified elevated temperature properties. Its common grades include P195GH, P235GH, P265GH, P295GH and P355GH, plus alloy grades such as 16Mo3. These tubes are widely used in boilers, superheaters, heat exchangers and high-temperature process piping in the European market.
ASTM A106 is the American standard for seamless carbon steel pipe for high-temperature service. It has three grades, A, B and C. Grade B is by far the most common and is the default seamless carbon steel pipe in North American and Middle Eastern projects.
Both products are seamless and both serve pressure applications, but their grade systems, chemical limits, test methods and documentation differ.
Scope of Each Standard
\n
| Aspect | EN 10216-2 | ASTM A106 Grade B |
|---|---|---|
| Product | Seamless steel tubes for pressure purposes | Seamless carbon steel pipe |
| Material Family | Non-alloy and alloy steels with elevated temperature properties | Carbon steel only |
| Common Grades | P195GH, P235GH, P265GH, P295GH, P355GH, 16Mo3 | Grade A, B, C |
| Key Applications | Boilers, heat exchangers, power and petrochemical plants | Refineries, power plants, high-temperature piping |
| Certification | Inspection documents 3.1 or 3.2, CE marking under PED | Mill test certificate per ASTM |
Chemical Composition Comparison
\n
| Element (max, mass %) | EN 10216-2 P265GH | ASTM A106 Grade B |
|---|---|---|
| Carbon (C) | 0.20 | 0.30 |
| Silicon (Si) | 0.35 | 0.10 min |
| Manganese (Mn) | 0.80 to 1.20 | 0.29 to 1.06 |
| Phosphorus (P) | 0.025 | 0.035 |
| Sulfur (S) | 0.020 | 0.035 |
The tighter carbon, phosphorus and sulfur limits in EN 10216-2 reflect the European practice of optimizing weldability and toughness, while A106 Grade B permits a higher carbon maximum that still satisfies most high-temperature service requirements.
Mechanical Properties Comparison
\n\n
| Property | EN 10216-2 P265GH | ASTM A106 Grade B |
|---|---|---|
| Minimum Yield Strength | 265 MPa | 240 MPa (35 ksi) |
| Tensile Strength | 410 to 530 MPa | 415 MPa min (60 ksi) |
| Elongation | 22% min | 30% min in 2 in |
Both materials are suitable for elevated temperature service, and both are frequently specified with supplementary impact testing when the design requires toughness at low ambient temperature.
Testing, Inspection and Certification
EN 10216-2 tubes are delivered with an inspection certificate, typically EN 10204 type 3.1, and products placed on the European market for pressure equipment normally carry CE marking under the Pressure Equipment Directive. Non-destructive testing of the full tube body is required by the standard.
ASTM A106 pipe is supplied with a mill test certificate reporting heat chemistry and tensile results. The standard requires hydrostatic testing or an approved non-destructive substitute, and supplementary requirements can add ultrasonic examination, Charpy impact testing and hardness testing.
How to Select Between Them
Selection is usually driven by the project location and governing code. European and many international projects accept EN 10216-2 grades such as P265GH directly; North American projects specify A106 Grade B. For global fabrication, check the design code for cross-referenced materials and verify that the chosen grade meets the design temperature, pressure and toughness requirements. Both standards are accepted in many international projects when the equivalent grade is confirmed on the certificate.
Common Misconceptions
A frequent error is assuming EN 10216-2 covers stainless steel tubes; stainless seamless tubes are covered by EN 10216-5, while EN 10216-2 is limited to non-alloy and alloy steels. Another error is treating A106 Grade B and P265GH as identical in all wall thicknesses; their yield strength tables and maximum carbon limits differ. A third misconception is that EN 10216-2 tubes cannot be used outside Europe; they are accepted worldwide when the contract permits.
FAQ
What does GH mean in P265GH?
GH stands for elevated temperature properties. P is pressure purposes, the number is the minimum yield strength in MPa, and GH indicates the material is intended for high-temperature service.
Is A106 Grade B the same as P265GH?
They are similar in strength level but not identical. A106 Grade B has a higher carbon limit and different tensile range; equivalence should be confirmed on a case-by-case basis.
Can A106 pipe be replaced by EN 10216-2 tube on a European project?
Yes, if the project code accepts the equivalent EN 10216-2 grade and the required inspection documents are supplied. Confirm the grade equivalence and any supplementary testing first.
Does EN 10216-2 include welded tubes?
No. EN 10216-2 is exclusively seamless tubes. Welded tubes for pressure purposes are covered by the EN 10217 series.
Which standard has tighter sulfur and phosphorus limits?
EN 10216-2 sets tighter limits on sulfur and phosphorus, which improves weldability and low-temperature toughness.
What is the size range of EN 10216-2 tubes?
EN 10216-2 covers a wide range of outer diameters and wall thicknesses for pressure applications, from small boiler tubes to large line pipes, with tolerances specified in the standard.

