Boiler tubes work under high temperature and high pressure. The tubes will also undergo oxidation and corrosion under the action of high-temperature flue gas and water vapor. Therefore, the steel tubes are required to have high lasting strength, high oxidation resistance, and good organizational stability. The steel grades used are: high-quality carbon structural steel steel grades are 20g, 20Mng, 25Mng; alloy structural steel steel grades are 15mog, 20mog, 12crmog, 15crmog, 12cr2mog, 12crmovg, 12cr3movsitib, etc.; rusty and heat-resistant steel is commonly used in high-pressure boilers such as 1cr18ni9 and 1cr18ni11nb In addition to ensuring the chemical composition and mechanical properties of the pipes, the pipes must be subjected to hydraulic pressure tests one by one, as well as expansion and flattening tests.
Since seamless carbon steel boiler tubes operate under high temperature and high pressure standards for a long time, the raw materials will undergo creep, plastic deformation and reduced ductility, and the initial mechanism will change and corrosion will occur. Seamless steel pipes used as heating furnaces should have:
①Long-term compressive strength;
②Plastic deformation processing capability;
③The time sensitivity tendency and thermal ductility are minimal;
④ It has high resistance to oxidation, coal ash, high temperature gas, steam corrosion and stress corrosion;
⑤Excellent mechanism reliability and excellent performance.


