Pipe fittings are a general term for the parts in the pipeline system that play a role in connecting, controlling, changing direction, diverting, sealing, supporting, etc. Pipe fittings include a wide range, common ones include flanges, unions, pipe hoops, ferrules, hose hoops, tees, etc.
Flange: A part that connects pipes to each other, mainly used for the connection between pipe ends.
Union: Also called oil joint, it is mainly used to connect matching hardware accessories and can be installed in various pipeline interfaces.
Pipe clamp: A commonly used accessory in industrial pipeline connections. It is a short section of pipe used to connect two pipes.
Card sleeve: It is a stainless steel pipe connection piece and is mainly used in mechanical pipe connection systems such as water treatment and municipal water supply systems.
Hose hoop: It is an ideal connection fastener, suitable for fasteners connecting soft and hard pipes above 30mm, and has a beautiful appearance after assembly.
Elbow: A type of connecting pipe fitting commonly used in plumbing installations. It is used to connect pipe corners and change the direction of the pipe.
Bend pipe: Use a complete set of bending molds for bending. No matter what kind of machinery, equipment and pipes, most bends are used.
Reducer: Also known as large and small heads, it is used to connect two different pipe diameters, and is divided into concentric and eccentric heads.
Reducing elbow: When making a 90-degree turn, the diameter of the pipe is changed. There are hot-pushed elbows, stamping elbows, and welded elbows.
Branch pipe stand: a reinforced pipe fitting used for branch pipe connection, replacing the use of reducing tees, reinforcing plates, reinforced pipe sections and other connection types.
Tee: Tee is a pipe connecting piece, also called pipe fitting tee or tee pipe fitting or tee joint. It is used at the branch pipe of the main pipeline.
Cross: Used to connect four pipes with the same diameter and the same vertical direction. It is mainly used to divert or change directions.
Gasket: A material placed between two flat surfaces to enhance the seal, a sealing element placed between tight covers to prevent fluid leakage.
Raw material tape: a commonly used auxiliary product in plumbing installation, used at pipe fitting joints to enhance the tightness of pipe joints.
Wire: a commonly used auxiliary product in plumbing installation. It is used to wrap around the threads of pipe fittings to seal and prevent water leakage.
Flange blind plate: Also known as blind flange, the real name is blind plate. It is a connection form of flange. It is actually a flange without a hole in the middle.
Pipe plugs: refer to externally threaded pipe fittings used to block the internal threads at the ends of pipes, including square pipe plugs, hexagonal pipe plugs, etc.
Head: It is a component of the container. It refers to the element used to close the end of the container to isolate the internal and external media. It is also called the end cap.
Welding plugs: Used to protect some parts of the welded parts that need protection or are easily injured or deformed during the welding process.
Pipe clamp: a pipe fitting used to fix pipelines. It is a pipe fitting commonly used in plumbing installations and is used to fix pipes.
Valve: a control component in a fluid delivery system, with functions such as shutoff, regulation, diversion, pressure stabilization, flow diversion or overflow pressure relief.
Compensator: It is composed of the bellows of its working body and end pipes, brackets, flanges, conduits and other accessories. It is a compensation component.
Decontamination remover: Prevent impurities in pipeline media from entering transmission equipment or precision parts, causing production failures or affecting product quality.
Reinforcement tube: Reinforcement means increasing strength. Improves the strength of the area by increasing the force-bearing area, which is basically a forged tube.
Clasp: It is the main retainer for removable denture repair. It is made of metal and mainly plays the role of retention, stability and support.
Tow hook: refers to the hook on the tugboat that is used to hook the tow rope and facilitate its release. It can be divided into spring tow hook, hydraulic tow hook, remote control tow hook, etc.
Lifting ring: It is a type of industrial spreader. It is a device used in lifting machinery to lift heavy objects. Common lifting rings include round lifting rings, pear-shaped rings, etc.
Bracket: The truss supporting the middle roof truss is called a bracket. It generally adopts parallel chord trusses, and its web members adopt a herringbone system with vertical bars.
