What does SS400 structural tube stand for

Dec 26, 2025 Leave a message

What does SS400 stand for?

 

SS400 is a general-purpose structural steel specified in the Japanese Industrial Standard (JIS G 3101), widely used in basic engineering fields such as construction, machinery manufacturing, and bridges. The "SS" in its name stands for "Steel Structure," and "400" indicates a minimum tensile strength of 400 MPa. This material is known for its good mechanical properties, moderate machinability, and economy, making it suitable for conventional processes such as welding, cutting, and stamping.

 

Chemical Composition

The chemical composition of SS400 is designed primarily for low carbon and low alloy content, ensuring both strength and machinability. Specific composition ranges are as follows (unit: %):

- Carbon (C): ≤0.30

- Silicon (Si): ≤0.35

- Manganese (Mn): ≤1.40

- Phosphorus (P): ≤0.050

- Sulfur (S): ≤0.050 The low carbon content contributes to its excellent weldability, while the addition of manganese enhances the material's strength and toughness. Phosphorus and sulfur, as impurity elements, are strictly controlled in content to avoid cold brittleness and hot brittleness.

 

Mechanical Properties

The mechanical properties of SS400 meet JIS standard requirements, with the main indicators as follows:

- Tensile strength: 400~510MPa

- Yield strength: ≥245MPa

- Elongation: ≥17% (gauge length 50mm)

- Hardness: Approximately 120~160HB (Brinell hardness)

Its strength is moderate, and its ductility is good, making it suitable for cold bending, stamping, and other forming processes. Furthermore, SS400 exhibits stable impact toughness at room temperature, but caution should be exercised when using it in low-temperature environments.

 

Typical Application Scenarios

1. Building Structures: Used for load-bearing components such as factory frames, stairs, and supports.

2. Machinery Manufacturing: Used as raw material for basic components such as gears, shafts, and machine frames.

3. Transportation: Suitable for low- to medium-stress components such as truck chassis and container parts.

4. General Hardware: Used to manufacture standard parts such as bolts, nuts, and flanges.

 

SS400 Structural Tubing factory

SS400 Structural Tubing Factory

Contact now