25MnG boiler tubes are low-alloy, high-strength boiler steel with a carbon content of 0.22%-0.30% and a manganese content of 1.20%-1.60%. Its yield strength can reach 295-390 MPa, and its tensile strength 490-610 MPa, which is higher than that of ordinary carbon steel. It also exhibits outstanding high-temperature and pressure resistance, making it suitable for high-temperature operating conditions below 450℃. (According to GB/T 713-2017 standard "Steel Plates for Boilers and Pressure Vessels")
Key performance characteristics:
The role of manganese: Manganese (content approximately 1.20~1.60%) significantly improves strength and hardenability, while inhibiting cementite precipitation, improving high-temperature stability, and preventing excessive performance degradation under long-term high temperatures;
Welding compatibility: With carbon content controlled within a reasonable range of 0.22~0.29%, preheating is not required before welding (preheating to 80~150℃ is recommended for thicknesses >20mm), and no heat treatment is required after welding to meet usage requirements, exhibiting excellent processability;
Creep and fatigue resistance: Low creep rate during long-term operation at 400~500℃, and able to withstand temperature cycle fatigue caused by boiler start-up and shutdown, resulting in a long service life.

Application Areas:
From Energy Equipment to Specialty Machinery
1. Coal Mining Machinery: As a core pressure-bearing component of hydraulic supports, 25MNG steel pipes must withstand working pressures exceeding 200MPa.
2. Engineering Vehicles: In critical components such as crane booms and pump truck booms, its weight is reduced by 15% while its load-bearing capacity is increased by 20%.
3. Energy Equipment: Particularly suitable for the hydraulic ends of fracturing pumps used in shale gas extraction, exhibiting excellent resistance to stress corrosion in hydrogen sulfide-containing media.
4. Military Industry: Used in drive shafts of special vehicles, hydraulic pipelines in ships, etc., its -50℃ low-temperature impact performance meets the requirements for use in extreme environments.

