What is A179 material

Nov 17, 2025 Leave a message

ASTM A179 is a ‌U.S. standard‌ for ‌heat exchanger and condenser tubes‌, primarily made of ‌low-carbon steel‌. The manufacturing process involves ‌cold drawing‌, which ensures a ‌highly smooth inner and outer surface finish‌ and ‌excellent wall thickness uniformity‌. Due to its ‌low-carbon composition‌, A179 steel pipe exhibits ‌superior weldability‌, minimizing the risk of cracks and other defects. It also offers ‌good thermal conductivity‌, which is critical for its application in heat exchange equipment.

 

The ‌ASTM A179‌ standard applies to ‌seamless cold-drawn low-carbon steel tubes‌ used in the manufacture of ‌heat exchangers, condensers, and similar heat transfer equipment‌. The standard covers tubes with ‌outer diameters (OD) ranging from 1/8 inch to 3 inches (3.2 mm to 76.2 mm)‌. However, tubes with ‌ODs and wall thicknesses smaller than this range may also be applicable‌, but the ‌mechanical property requirements may not apply‌ to tubes with an ‌OD smaller than 1/8 inch (3.2 mm)‌ or a ‌wall thickness less than 0.015 inch (0.4 mm)‌.

 

‌ASTM A179 Chemical Composition (%)‌

The chemical composition requirements for ‌ASTM A179‌ (seamless cold-drawn low-carbon steel tubes) are as follows:

Element C (Carbon) Mn (Manganese) P (Phosphorus) S (Sulfur)
‌Min‌ 0.06% 0.27% - -
‌Max‌ 0.18% 0.63% 0.035% 0.035%

 

‌ASTM A179 Mechanical Properties‌

The mechanical properties of ‌ASTM A179‌ (seamless cold-drawn low-carbon steel tubes) are as follows:

Property Symbol Requirement
‌Tensile Strength‌ σb ≥325 MPa
‌Yield Strength‌ σs ≥180 MPa
‌Elongation‌ δ ≥35%

 

A179 boiler tube

Contact Us For A179 Boiler Tube For High Pressure