1. Correspondence between material and standard
DIN2391: German cold-drawn or cold-rolled precision seamless steel tube standard, its corresponding Chinese national standard GB/T 3639-2000 (cold-drawn or cold-rolled precision seamless steel tube delivery technical conditions) ST52: belongs to German DIN standard.
ST52: It belongs to the low alloy high strength steel in the German DIN standard. According to different standard versions and application scenarios, its Chinese equivalent grades have the following differences:
GB/T 1591-1994: equivalent to Q345C (old standard, now updated);
Current standard (GB/T 1591-2018): closer to Q345B or 16Mn (old grades), due to composition and mechanical properties (e.g. yield strength ≥345MPa, tensile strength 470-630MPa) are more compatible with Q345B.
2. Description of key differences
Chemical composition:
The carbon content of ST52 (≤0.22%) is slightly higher than that of Q345B (≤0.20%), and Q345B has stricter restrictions on alloying elements such as silicon and chromium;
Q345C has more stringent requirements for sulphur and phosphorus content (S ≤ 0.003%, P ≤ 0.020%), which corresponds to Q345C of the earlier ST52 standard.
Mechanical properties:
Both yield strength is similar (ST52 wall thickness ≤ 16mm for ≥ 355MPa, Q345B for ≥ 345MPa), but the tensile strength range ST52 (500-650MPa) is slightly higher than Q345B (470-630MPa).
3. application recommendations
Engineering field: if ST52 is to be replaced, give priority to Q345B (current national standard) or 16Mn (traditional grades), which is particularly suitable for mechanical structures, pressure vessels, etc;
Standard adaptation: When it comes to the manufacture of precision steel tubes, it is necessary to refer to GB/T 3639-2000, the process standard corresponding to DIN2391.
Summary: DIN2391 ST52 can be regarded as Q345B (GB/T 1591-2018) in the current Chinese standard, or Q345C (GB/T 1591-1994) according to the old standard. 1591-1994), and at the same time need to be combined with specific process requirements to match the GB/T 3639-2000 standard.


