What is grade 10 steel?
Grade 10 steel is a carbon structural steel widely used in various industrial fields with the following characteristics:
Chemical composition: mainly includes carbon (C), silicon (Si), manganese (Mn), phosphorus (P), sulfur (S) and nickel (Ni) and other elements, the specific content is shown in the following table
| composition | C | Si | Mn | P | S | Cr | Ni | Cu |
|---|---|---|---|---|---|---|---|---|
| Min | 0.07 | 0.17 | 0.35 | - | - | - | - | - |
| Max | 0.13 | 0.37 | 0.65 | 0.03 | 0.03 | 0.15 | 0.3 | 0.2 |
* The nitrogen content of steel smelted in oxygen converter should not exceed 0.008%. If the supplier can guarantee the quality, no analysis is required.
Mechanical properties: good plasticity and toughness, elongation δ5% ≥ 31%, tensile strength ≥ 312MPa, yield strength ≥ 182MPa.
Welding performance: good weldability, no temper brittleness, suitable for various welding operations.
Cold processing performance: easy to cold and hot processing, but poor hardenability and hardenability.

Heat treatment: its performance can be adjusted through annealing, normalizing, quenching and tempering and other heat treatment methods to meet different industrial needs.
Due to its good plasticity and toughness, this steel is often used to manufacture mechanical parts that require a certain strength and good welding performance, such as oil tanks, top pier bolts, washers, gaskets, carburized parts and welding rods.

