What is the yield strength of ASTM A500 Grade B Structural tube

Dec 31, 2025 Leave a message

A500 GRB square tubing is a type of structural steel with a square cross-section. It is typically made of carbon structural steel or low-alloy structural steel, with a yield strength usually not less than 290 MPa and a tensile strength between 400 and 550 MPa, meeting the requirements of most building frames and mechanical supports. This type of square tubing can withstand large loads under stress and possesses good weldability and cold bending performance. Due to its cold-forming process, it has a relatively smooth surface and high dimensional accuracy, making it suitable for applications requiring high precision in components.

 

Property Requirement/Value
‌Chemical Composition (wt%)‌  
Carbon (C) ≤ 0.26%
Manganese (Mn) ≤ 1.35%
Phosphorus (P) ≤ 0.035%
Sulfur (S) ≤ 0.035%
Copper (Cu) ≥ 0.20% (when specified)
‌Mechanical Properties‌  
Min. Yield Strength ≥ 350 MPa (50 ksi)
Min. Tensile Strength ≥ 450 MPa (65 ksi)
Elongation (50mm gauge) ≥ 23%

 

Manufacturing Process

The manufacturing process of A500 square tubing mainly includes the following steps:
First, steel strips are produced through hot rolling or cold rolling.

Then, they are continuously bent using a cold bending forming unit to form a square cross-section.

Next, the joints are firmly welded using high-frequency welding or submerged arc welding to ensure the integrity and sealing of the tubing.

After welding, the square tubing undergoes sizing and straightening processes to ensure its dimensions and straightness meet standard requirements.

Finally, surface treatments are performed as needed, such as galvanizing or spraying with anti-rust paint, to improve its corrosion resistance.

 

A500 GRB Structural Tube Factory

A500 GRB square tube factory

Contact now