3L HDPE 5D Bend, 36 Inch, API 5L X60

Sep 08, 2025 Leave a message

HDPE 5D elbows‌, i.e., elbows with a bending radius 5 times the pipe diameter, offer excellent ‌fluid conductivity‌ and help ‌reduce fluid impact effects‌.

‌Manufacturing Process of 5D Bends ‌

The production of elbows mainly involves ‌cutting, forming, welding, heat treatment, and inspection‌.

‌Raw Material Preparation‌:

Procure ‌carbon steel plates or pipe blanks‌ according to design drawings and standards.

Conduct ‌visual inspection and chemical composition analysis‌ upon arrival to ensure no cracks, inclusions, or defects.

‌Forming Process‌:

‌Hot Bending‌: Performed at high temperatures to reduce cracks and deformation, suitable for large elbows.

‌Cold Bending‌: Ideal for smaller elbows or those with high surface finish requirements.

‌Mold Design & Forming‌:

Mold designs must comply with ‌GB dimensions‌ to ensure a ‌5D bending radius‌.

Operators must control ‌bending angle and pressure‌ to avoid stress concentration or distortion.

‌Welding Process‌:

Connection sections typically use ‌welding methods‌ (e.g., ‌manual arc welding, gas shielded welding‌).

‌Bevel preparation‌ is required before welding to ensure full fusion.

‌Heat Treatment‌:

‌Normalizing or annealing‌ is applied to ‌eliminate welding stress‌.

Parameters must strictly follow standards to maintain mechanical properties.

‌Inspection & Testing‌:

‌Non-destructive testing‌ (e.g., ‌ultrasonic, radiographic‌) to detect internal defects.

‌Dimensional inspection‌ to ensure compliance with GB requirements.

Specification

Radius: R=5D.

Standard: ASME B16.49.

Materials: API 5L X60 / ASTM A860 WPHY 60.

Suface Finished: 3L HDPE DIN30670 S-V.

Thickness: 3mm - 11.90mm.

Degree: 30deg. 40deg. 45deg. 54deg. Or according to the client requirement.

Model Size: 36 Inch (DN900).

 

3l hdpe 5d bend