Precision steel pipes for automobiles are special pipes for automobiles launched by Gnee to closely follow the market demand for new automobile product development and expansion of localization of automobile materials. They are used for automobile controllers, shock absorbers, transmission shafts, steering gears, front cars, and rear cars. , mufflers, automobile accessories and other series varieties.
Main grades or steel grades
Commonly used grades include: 10# ~ 45#, 16Mn, 20Cr, 15CrMo, 35CrMo, SAE8617H, etc.
Product execution standards
YB/T 4203-2009 Seamless steel pipe for automobile semi-trailer axles;
GB/T 3639-2008 Cold drawn or cold rolled precision seamless steel pipe
DIN 2391-1994 Technical delivery conditions for precision seamless steel pipes
Features
Due to the particularity of automobile materials, the steel pipes used are required to be beautiful in appearance, light in weight, safe to drive, stable and reliable. In order to ensure the service life of automobile steel pipes, the steel pipe material is required to have good corrosion resistance and a certain service life. Therefore, depending on the use part, there are strict requirements on the material, dimensional accuracy, mechanical properties, process performance and surface quality of automotive steel pipes. Some special products also have corresponding requirements for the wear resistance, fatigue resistance, welding performance, etc. of steel pipes. In many cases, good welding performance is required, as well as good reprocessing performance and heat treatment performance. Some final parts require steel pipes with surface plating and coating requirements, and they are required to be delivered in a bright heat-treated state. For example: due to dynamic balance considerations, the steel pipes used for automobile transmission shafts are required to have uniform wall thickness, good fatigue resistance, and reach a certain static torque value; for shock absorber cylinder tubes, not only the inner hole ovality, inner surface There are strict requirements on roughness, and the inner surface is required to have good wear resistance; for the steering tie rod, it is required to have good cold extrusion processing performance; for the car tube, it is required to be delivered in a bright heat-treated state.
Product specification range:
Outer diameter: Φ16mm~Φ114mm; wall thickness: 1.0mm~10.0mm.


