Cold-drawn steel pipe is a type of steel pipe, that is, it is classified according to different production processes, which is different from hot-rolled (expanded) pipe.
It is processed through multiple passes of cold drawing during the diameter expansion process of the raw tube blank or raw material pipe, usually on a 0.5 to 100T single-chain or double-chain cold drawing machine.
Cold rolled (rolled) steel pipes are divided into general steel pipes, low and medium pressure boiler steel pipes, high pressure boiler steel pipes, alloy steel pipes, stainless steel pipes, petroleum cracking pipes, machined pipes, thick wall pipes, small diameter cold drawn pipes with internal molds and other steel pipes. , also includes carbon thin-walled steel pipes, alloy thin-walled steel pipes, stainless thin-walled steel pipes, and special-shaped steel pipes. The outer diameter of cold-drawn steel pipes can reach 6mm and the wall thickness can reach 0.25mm. The outer diameter of thin-walled pipes can reach 5mm and the wall thickness is less than 0.25mm. The accuracy and surface quality are significantly better than hot-rolled (expanded) pipes, but they are affected by the process. Constraints, its caliber and length are subject to certain restrictions.
use
Cold-drawn steel pipes are precision cold-drawn seamless pipes with high dimensional accuracy and good surface finish used in mechanical structures and hydraulic equipment.
The use of precision seamless pipes to manufacture mechanical structures or hydraulic equipment can greatly save machining hours, improve material utilization, and at the same time help improve product quality.
High-quality carbon structural steel cold-drawn seamless pipes are mainly made of No. 10 and No. 20 steel. In addition to ensuring the chemical composition and mechanical properties, hydrostatic tests, curling, flaring, flattening and other tests are required.
Cold drawn specifications
Common specifications of cold drawn steel pipes: 12mm 14mm 18mm 20mm 25mm 28mm 30mm 32mm 35mm 38mm 40mm 42mm 52mm


