What Is the Density of S355JR Structural Tube?
The density of S355JR structural tube material is approximately 7.85 g/cm3 (7850 kg/m3). This is the standard density of structural carbon steel and does not change between grades: S235JR, S275JR and S355JR all share the same value because density is a function of the iron-based crystal structure, not of the small alloy additions that distinguish the grades. The practical consequence is that the weight of a given S355JR section can be calculated with the same constants used for any other carbon steel member.
S355JR itself is a structural steel defined in EN 10025-2, with a minimum yield strength of 355 MPa and a minimum impact energy of 27 J at 20 deg C. When produced as square hollow section (SHS) tube, the product follows EN 10210-1 (hot finished) or EN 10219-1 (cold formed).
Key Physical Properties
| Property | Typical value |
|---|---|
| Density | 7.85 g/cm3 (7850 kg/m3) |
| Coefficient of thermal expansion | 12 x 10-6 / deg C (12 micrometers per meter per degree) |
| Thermal conductivity at room temperature | Approximately 50 W/(m.K) |
| Modulus of elasticity | Approximately 210 GPa |
These values mean that a structure made of S355JR expands and contracts predictably with temperature, conducts heat efficiently, and retains its dimensions stably within the normal design range. The modulus of elasticity is used in all deflection and stability calculations; note that it is essentially the same for all structural carbon steels, so choosing S355JR increases strength but not stiffness compared with S235JR.
Manufacturing Process
S355JR square tube is manufactured from hot-rolled strip. The strip is slit to the required width and cold-formed through a roll-forming unit into a square cross-section, then the seam is closed by high-frequency electric-resistance welding, which fuses the edges without filler metal. Internal and external weld beads are trimmed so that the bore is smooth and the outer surface is flat. The tube is then sized and straightened to bring the side dimensions, squareness and straightness within the tolerance class of EN 10219-1, cut to length, and given the specified surface treatment. Each stage is parameter-controlled: welding current and speed determine seam quality, and sizing rolls determine the final geometry.
Specifications and Sizes
S355JR square tube is commonly available with side lengths from 20 mm to 400 mm and wall thicknesses from 1.5 mm to 16 mm, with the combination limited by the forming capability of the mill and the design rules of the section. The allowable deviations in side length, wall thickness and straightness comply with EN 10219-1 or the project specification, and the corner radius is defined as a function of the wall thickness. Special sizes can be rolled to order when the standard range does not cover the requirement.
How to Calculate the Theoretical Weight
The theoretical weight per meter of a square tube can be calculated from the cross-section: W = (4a - 4t) x t x 0.00785, where a is the side length in millimeters, t is the wall thickness in millimeters, and W is the weight in kilograms per meter. For a square tube with a side length of 100 mm and a wall thickness of 5 mm, the calculation gives (400 - 20) x 5 x 0.00785 = 14.9 kg/m. The actual weight varies slightly with manufacturing tolerances, corner radius and the exact density of the heat, so the theoretical value is used for estimation, ordering and logistics, not for settlement.
Performance Characteristics
The square section has equal moments of inertia in the two principal axes, giving uniform bending resistance in every direction and excellent torsional behavior compared with open profiles of the same weight. The high strength-to-weight ratio of S355JR reduces the mass of the structure, and the flat faces simplify bolted, welded and splice connections. The smooth surface accepts paint, powder coating and galvanizing readily. In fabrication, the tube can be cut, drilled, bent and welded with conventional methods; welded joints develop strength comparable to the base material, and normal welding practice does not degrade the mechanical properties of the tube.
Applications
Construction: factory trusses, stadium space frames, curtain-wall support systems and columns, where the regular section simplifies node design and the hollow profile reduces weight. Machinery manufacturing: equipment frames, conveyor rails and automation supports, where dimensional accuracy keeps assemblies true. Transportation: truck body frames, container spreaders and trailer components, where reliable strength and moderate weight improve payload efficiency. Energy and infrastructure: solar-panel support structures, sign gantries and access platforms that benefit from standardized section properties and easy galvanizing.
Frequently Asked Questions
What is the density of S355JR steel?
Approximately 7.85 g/cm3 (7850 kg/m3), the standard density of structural carbon steel. It is the same for S235JR, S275JR and S355JR and is used in all weight and shipping calculations.
How do I calculate the weight of S355JR square tube?
Use W = (4a - 4t) x t x 0.00785 for a square tube, with a and t in millimeters, giving kilograms per meter. For a 100 mm x 5 mm tube this is about 14.9 kg/m. For rectangular tube use W = (2a + 2b - 4t) x t x 0.00785.
Is S355JR heavier than S235JR?
No. Both grades have the same density of 7.85 g/cm3. S355JR is stronger (higher yield and tensile strength), so for the same load a designer can often use a lighter section, but the density itself is identical.
What is the maximum size of S355JR square tube?
Common supply covers side lengths from about 20 mm to 400 mm with wall thicknesses from 1.5 mm to 16 mm. Larger or non-standard sizes can be produced to order, limited by the mill forming capacity and the applicable standard.
Can S355JR square tube be welded after galvanizing?
Welding after galvanizing should be avoided because the zinc coating produces fumes and embrittles the weld. The normal sequence is to fabricate and weld first, then galvanize the finished assembly. If a weld is unavoidable after galvanizing, the coating must be removed locally and repaired afterwards.
Does the density change with temperature?
Yes, slightly. Steel expands when heated, so density decreases marginally with temperature, but for structural design the room-temperature value of 7.85 g/cm3 is used throughout. Thermal expansion is handled separately through the coefficient of thermal expansion in the design of long lines and large frames.

